Stylist Guide › Section 3: Lighting › Rule #90
Why does everyone look tired in a bathroom mirror?
The rule in one minute. A single ceiling light in a bathroom shines down from above or behind you, so the mirror shows shadows under eyes, nose and chin, and the vanity looks flat in photos. Side lights at about face height on both sides of the mirror, or a backlit mirror, light faces evenly and make the vanity glow. For a sale, match all bathroom globes in a warm or neutral white, make sure every fitting works, and if you're updating anything, have a licensed electrician add side lighting. Never use plug-in lamps near water.
The checklist question: what does your mirror show?
"I look fine in my bathroom mirror."
"Lean in. Look under your eyes."
"…Ah."
Top light makes shadows go down. A ceiling light over the vanity or behind you lights the top of your head and leaves everything below in shadow. That's the tired look.
Side light fills them in. Lights on both sides of the mirror, at face height, light the face from the front and sides. Shadows disappear. It's why makeup mirrors have lights around the edges.
It matters for the photos too. Side lights or a lit mirror make the vanity and basin glow. A single downlight makes the same vanity look flat, and often puts a hot spot on the benchtop (Rule #77 covers glossy surfaces).
Are side lights better than ceiling lights in a bathroom?
For the vanity, yes: lights on both sides of the mirror at about face height light faces and basins evenly, without the shadows a single overhead light creates. A ceiling light still has a job, lighting the room as a whole. The best bathrooms use both.
The Vanity Light Check
- Turn on every bathroom light. Do they all work? Any flicker (Rule #87)?
- Check the globes match in colour. Warm or neutral white, not a cool blue next to a yellow.
- Stand at the mirror. Is the main light above or behind you? That's the top-light problem.
- Look at the vanity from the door. Is there a hot spot on the benchtop or a dark basin?
- Clean every fitting and the mirror (Rule #305 covers checking mirrors).
- Decide on an upgrade, if you're updating: side wall lights, vertical light bars either side, or an LED-backlit mirror, all installed by a licensed electrician.
The Vanity Light Check: every bathroom light working and matched, and side lighting at face height on both sides of the mirror wherever an upgrade is planned.

Mistake and fix
Mistake: a plug-in lamp on the vanity to soften the light. Fix: never use plug-in lamps near water. Use the fixed lights you have, and talk to an electrician about adding proper bathroom-rated side lights.
Mistake: a cool daylight globe in the vanity fitting and a warm one in the ceiling. Fix: match them. Choose warm or neutral white for both.
Mistake: an old fluorescent tube above the mirror. Fix: ask an electrician about replacing it with a modern LED fitting or a lit mirror.
Time and effort
- Matching and replacing globes: about 10 minutes per bathroom.
- Cleaning fittings and mirrors: about 15 minutes.
- Adding side lights or a lit mirror: a licensed electrician's job, usually a few hours, booked well before photos.
Why it's an electrician's job
Bathrooms are wet areas, and electrical work in them follows strict rules about where fittings can go and what they must be rated for. That's exactly why the upgrade isn't a weekend DIY job. A licensed electrician knows which zones are safe for wall lights and which products suit the space.
The blind spot: you see yourself up close
You use the bathroom mirror at 30 cm. Brushing teeth, shaving, makeup. At that distance, you adjust your head to the light without thinking.
A buyer stands at the door and sees the whole vanity, lit or not. The photographer does the same, from the corner. Step back to the doorway and look at the vanity, not at yourself.
What if…
You can't do any electrical work before the sale. Match the globes, clean everything, and keep the ceiling light on with the door open so daylight from the hall helps.
The bathroom has no window. Lighting is everything there. Every fitting working, matched globes, and a clean, bright mirror.
FAQ
Where should bathroom vanity lights be placed? On both sides of the mirror at about face height, or as a lit mirror. A single ceiling light can stay for general light, but side lighting gives the most flattering result.
Is it worth upgrading bathroom lighting before selling? If the vanity light is dated or only overhead, a licensed electrician can add side lights or a lit mirror. It can make the bathroom look newer in photos.
Bathrooms are judged in seconds, and light shapes that judgement. With Photo Ready Styling, our stylist styles your home with your own furniture, towels and accessories before the photos, bathrooms included. If you'd rather do it yourself, a Photo Ready Consultation lists what to fix in each bathroom within 48 hours of the visit. We tell you what to change; your electrician does the electrical work. See current prices.
Keep reading: Rule #305: Check every mirror for reflections and smudges (checking every mirror on photo day) · Rule #68: Use mirrors to double the light (where to put a mirror to reflect light)
◀ Previous: Rule #89: Use accent lighting on textured walls · Section 3 contents · Next: Rule #91: Use fewer accessories for more impact ▶
Part of the Goldpac Stylist Guide: 220+ home staging rules from Goldpac's Sydney styling team.